NEW JCB NXT 145 QUARRY MASTER

• Heavy-duty front & top guard with light guards on Cabin for enhanced safety.

• Thin and low effort Joystick for long productive operations.
• Laminated glass on the front and right-hand side of the cabin.
• Advanced self-diagnosis system with error codes and multi-coloured warning alerts for easy and quick maintenance.
• Display of all critical parameters accessed through the internal menu for an easy health monitoring with and easy rotary switch control.
• First-in-class safety features like breaker overuse alert, hydraulic accumulator, swing lock, hydraulic interlock, engine & hydraulic overheat safety system and 2GO hydraulic isolation system.

• Extended maintenance interval of 500 hrs of Engine Oil, Oil Filter and Fuel Filter.
• Long oil drain interval of 5000 hrs for Hydraulic Oil change, 1000 hours for Hydraulic filter change, and Boom pivot pin greasing at 50 hours interval.

• JCB engineers are equipped with an industry-first JCB Smart Serve technology which enables JCB to send the closest engineer to the machine, ensuring maximum uptime.
• With 750+ service outlets, the largest network of 5000+ Service Experts & trained engineers and easy availability of genuine parts and one shop solution, the serviceability is easy, quick, and efficient.
• 65+ dealerships outlets are always ready with more than 250+ service vans to serve customers.
• 5 strategically located warehouses to serve you with genuine wherever you are.
• 11 operator training centres with 24x7 support in 12 different languages.

The JCB NXT 145 Quarry Master Tracked Excavator is powered by IntelliControl. It’s a new intelligent way to achieve excellent fuel efficiency and productivity, as required by the user, with the utmost ease of use and control on the machine operation, maintenance and safety.

• Best-in-class digital screen with anti-glare informative colour display.
• Enhanced user experience to provide control over the operation, daily & periodic maintenance and safety checks of machine.
• Accurate operational information like quantity of fuel left in the tank, engine speed and operating modes, trip meter, auto-idle status & time setting and much more.
• Critical maintenance information like colour coded health alerts, easy diagnostic system, service warning alerts and much more.
• Integrated with advanced Telematics Technology – JCB LiveLink. Stay connected with your machine 24x7 and get health and maintenance alerts, mode wise machine usage and more with the JCB LiveLink mobile application.

• Excellent digging and tear out forces of the bucket (9432 kgf) and dipper (7566 kgf) for higher output and faster completion of work
• Boom and Arm regenerative system leads to high operating speed and helps to reduce the load on the engine, thereby lowering the fuel consumption.
• The stunning swing speed of 13.6 rpm for quick and fast cycle time.
• 10 Working modes for varied operations and Power Plus mode for 6%* higher output.
• One-Touch Idler for instantaneous engine speed reduction, whenever required.
• Auto Idler System reduces engine rpm automatically when the machine is not in use.
• ecoHYDRAULLICS for optimized engine speed & Hydraulic pump control to minimize the hydraulic losses and enhancing the fuel efficiency of the machine.

• Heavy-duty boom with reinforcement and cast pivot end at boom foot joint.
• Improved cross-section area for high strength.
• Bigger and Heavy-duty bucket size (0.63 cu. m & 0.72 cu. m.) for high output.
• Heavy-duty track chain with thicker shoes (44 x 500mm), large section links & rollers.
• Heavy-duty upper frame with reinforced side member and Belly guard ensures protection of the rotary joint and hoses from any external damage.
• 2 track guides on each side-retain the track in its position while working in tough underfoot conditions.
• Heavy-duty track frame with idler area reinforcements.

• Dust and waterproof IP67 / IP69 connectors have been used in electrical connectors for longer life.