The JCB E-TECH electric Power Pack range

JOIN THE LEADERS IN ELECTRIC INNOVATION AND START OPERATING THE OFF-HIGHWAY EQUIPMENT OF THE FUTURE.

JCB’s pioneering power packs are the first in a range of energy storage solutions with zero emissions, less noise and no compromise on performance to provide power wherever and whenever you need it.

  • Power Rating 8kW
  • Power Output Single Phase
  • Power Capacity 23kWhr (1.25Qe) 46kWhr (1.50Qe)


Zero emissions

JCB’S CLEAN TECHNOLOGY POWER PACKS HAVE NO EMISSIONS AT POINT OF USE LIKE CARBON DIOXIDE, A HARMFUL GREENHOUSE GAS.

  • Zero emissions of CO2, Nox and Particulates.
  • Solar inputs for clean recharging.
  • Works indoors and underground.

Low noise

WITH NO ENGINE, THE JCB ELECTRIC POWER PACKS OFFER NEAR SILENT OPERATION ON SITE FOR NOISE SENSITIVE APPLICATIONS OR OUT OF HOURS OPERATION.

  • No noise in use.
  • Suitable for noise sensitive applications.
  • Can provide power overnight.

Reduced costs

STATE OF THE ART INVERTOR TECHNOLOGY AND AUTOMOTIVE GRADE LITHIUM-ION TECHNOLOGY ENSURE THAT THE JCB ELECTRIC POWER PACKS HAVE CONSIDERABLY LOWER OPERATING COSTS.

  • 95% eficient inverter technology.
  • High density automotive grade Li-ion batteries.
  • Solar panel connectivity.
  • Automatic starting and stopping of generators for maximum efficiency.

No compromise

GET THE SAME PERFORMANCE AS CONVENTIONAL POWER PACKS. BY USING THE MOST ENERGY DENSE LITHIUM-ION TECHNOLOGY, JCB ELECTRIC POWER PACKS PROVIDE THE MAXIMUM AVAILABLE POWER IN THE SMALLEST PACKAGE.

  • Less space needed on site.
  • Stackable up to 3 units high for minimal storage.
  • 1m2 footprint for easy, economical transportation.

Built to last

THE JCB ELECTRIC POWER PACKS HAVE BEEN DESIGNED TO WITHSTAND THE TOUGHEST APPLICATIONS, WITH ROBUSTNESS AND EASE OF MOVEMENT FOREFRONT IN THE DESIGN PROCESS.

  • 100% all steel enclosure for maximum protection.
  • 4 lifting points.
  • 4 tie down points.
  • Fork pockets on every side.

FAQ's

Enter quote signature

Answering your questions surrounding the new JCB Powerpack...

Even after 2000 full charge and discharge cycles (expected to be over 7 years) the batteries still have over 85% of their capacity left.
With zero emissions and zero noise coupled to a robust enclosure, the JCB power pack is suitable for use either indoors or outdoors.
The JCB powerpack is designed to support a single phase load. If you are using a distributed 3 phase system then the JCB power pack can support a single phase, but it is not suitable to power a 3 phase load.
The peak output from the 125Qe or 150Qe is 8kW
This will depend on the load. The 125Qe has a useable capacity of 20kWhr, so if a load of 2kW is applied then there this can be sustained for 10 hours, if the load applied is 5kW then this run time will be reduced to 4 hours.
The JCB Power Pack can be recharged frm any single phase supply - mains, mobile power or optionally by solar panels.

FIND A DEALER NEAR YOUR LOCATION.